Radiolink RC6GS V3 2.4G 7 Channel Radio Transmitter with R7FG Receiver Gyro Telemetry Included Remote Controller for RC Car Boat

RC6GS V3 Specifications：
Brand: Radiolink
Item Name: RC6GS V3 7CH Transmitter
Dimension: 174.8*116.4*224.2mm (6.88"*4.58"*8.83)
Weight: 319g (11.25 oz)
Channels: 7 channels
Battery Case Dimension: 89*59*25mm (3.5” *2.32” *0.98)
Frequency: 2.4GHz ISM band(2400MHz~2483.5MHz)
Applicable Model Types: Crawlers, Tanks, Caterpillars, Remote Controlled Lifebuoy, and other types of RC cars or boats, Robots
Modulation Mode: GFSK
Spread Spectrum Mode: FHSS&67-channel pseudo-random frequency sequence hopping
Memory: 30 models
Antenna Length: 106mm (4.17”)
Control Range: 600m(1968.5ft) (Maximum range tested in unobstructed areas free of interference)
LCD Screen: 128*64 resolution, LCD backlight
Operating Voltage: 4.8-16.8V, 6pcs of AA batteries or 2S-4S LiPo battery
Operating Current: 80-120mA
RF Power: <20dbm
Channel Resolution: 4096 with regular jitter of 0.5us
Low Voltage Alarm: Yes, when less than 7.2V or customize on 2S-4S battery, low voltage alarm can be set for each model
Low RSSI Alarm: Yes
Low Model Battery Voltage Alarm: telemetry of maximum 8S (33.6V) model battery voltage
Compatible Receivers: R7FG (std), R6F, R6FG, R8F, R8EF, R4F, R4FGM
CRSF Protocol Supported: is compatible with TBS Crossfire by connect the TBS Crossfire to the DSC port of the RC6GS V3
FPV Head Track Function: Support
Simulator Function: Support
Timer Function: Support
Battery: Dedicated lithium battery 7.4V 2800mah 2S (optional)

R7FG Specifications：
Dimensions: 35*22*13 mm（1.37*0.86*0.5"）
Weight: 6g (0.21 oz)
Antenna Length: 205mm(8.07")
Channel quantity: 7 channels
Signal Output: PWM&PPM/PWM&SBUS
Model Application: Cars/Boats/Robots
Frequency: 2.4GHz ISM band(2400MHz~2483.5MHz)
Spread Spectrum Mode: FHSS, 67-channel pseudo random frequency hopping
Voltage Range: 3~12V
Operation Current: 30mA (base on power voltage)
Control Distance: 600 meters on the ground
Real-time Telemetry：The model voltage will display by connecting the wire to the ESC, battery, and Telemetry port of receiver R7FG, no extra module needed.Telemetry of maximum 8S(33.6V) battery supported.
Gyro Mode: Receiver built-in gyro
Compatible transmitter: RC6GS V3/RC6GS V2/RC4GS V2/RC6GS (3-position switch version), RC4GS (version with P.D AFTER 180101)/T8S/T8FB

New Features for the RC6GS V3(V2 Upgrade):
*7 Channels
*30 models memory storage
*One switch to active the D/R setup
*One switch to active the EPA setup
*One switch to active different mix control
*Timer function for racing and training
*Low battery voltage of each model can be setup independently
*Support head tracking /simulator /crossfire

--Setting simplicity, Fast Response for 7 Channels, 30 Models Memory Storage, telemetry of Maximum 8S Vehicle Battery Voltage, Dual Mix Programmable Control, Cruise Control, USB upgrade firmware, Throttle Lock, Voltage Protection, ABS and fail-safe protection, 10 Subsidiary ID, outstanding long range up to 600 meters and more features. (Actual control distance is according the local environment)

--RC6GS V3 is an ideal partner for all types RC cars and boats in the market including single-engine and twin-engine models such as Crawlers, Tanks, Caterpillars, Basher, RC Short-Course Truck, RC Crawler, Drifting, Gasoline RC Car, Mini RC Car, RC Monster Truck, Off-Road RC Car and other types of RC cars or boats.

RC6GS V3 RC Remote Control Transmitter Features:
1.【Excellent Anti-interference】: Real pseudo random algorithm FHSS communication technology makes RC6GS V3 control distance up to 1900 feet (600 meters), and over 20 units of RC6GS V3 can work simultaneously at one place without any interference.
2.【Up to 600M Ground Distance】: The control distance is up to 600 meters under the superior anti-interference ability.
3.【30 Models Memory Storage】: Up to 30 models memory can be saved and each model can be set up and named separately.
4.【Dual Programmable Mix Control】: Mix control can be programmed with any two channels and each mix control can be turned on by one switch. That's friendly for twin-engine vehicles, such as tanks, boats, 4 wheel steering car.
5.【Throttle & Steering Dual Rate】: Support one switch to active the servo deviations.
6.【Two-way Transmission Return】: Real-time signal strength, RX battery voltage and vehicle battery voltage(telemetry of maximum 8S)can be displayed on the radio screen.(Only support works with radiolink R7FG or R8F receiver)
7.【Built in Gyro】: R7FG built-in gyro can keep the vehicle running in a straight line, and Gyro sensitivity can be adjusted by transmitter, which fits for drifting and on-road cars.
8.【Timer Function】: The timer allows you to grasp the lap and complete track results in time to help you train yourself before the race
9.【Customized Channels】: CH3-CH7 can be customized to VR, three-way switch and tact switch, the tact switch can be used for cruise control mode, a good idea for crawler, all channels' fail-safe values can be set to any value as you need.
10.【3 Advanced Entertainment Modes】: The DSC port support connect simulator, head tracking and TBS crossfire, will bring you more diverse experience.
11.【Reverse Polarity Protection】: Anti-polarity connect protection technology to keep your transmitter safety even if you Accidentally connect the wrong positive and negative poles. JST connector supports multiple batteries: liPo or 6*AA.(NOT INCLUDED)

Note: If you need manual in detail, here's the official online manual (Click here)

Standard Package List:
RC6GS V3 radio x1
7.4V 2800mah 2S battery (optional)
R7FG receiver x1
XT60 Telemetry cable x1
Neck lanyard x1
User manual x1
1x Carrying BagReal-time Information Transmission:
The telemetry feature can give you real-time information for reference, like vehicle's battery voltage, RSSI, transmitters receiver's battery voltage and more. Max Telemetry Voltage up to 8S(33.6V).New Upgrade Functions of RC6GS V3:Gyro Inside the Receiver:
The integrated gyro in receiver will help you automatically correct the servo directions, which works well for on/off road vehicle's model.Note: Keep the receiver plugs dry after driving in water.

Low Voltage Alarm Page Show:
low voltage and RSSI alarm can be set independently for each modelNote
* All RadioLink transmitters are not open sourced and can only bind to receivers developed by RadioLink. Vice versa.

RC6GS V3 FAQ:
Q: What battery is suitable to work with RC6GS V3? What's the voltage range?
A: The JST connector of RC6GS V3 can be easily adapted for various battery, including LiPo battery of 2S to 4S and 6pcs of AA batteries. The voltage range is 4.8V to 16.8V. Check the picture for battery box reference.

Q: What is the difference between R7FG V1.3 and R7FG V1.4?
A: The signal output of the ch6 and ch7 changed.
R7FG V1.4 CH6 is PPM output while V1.3 is PWM output;
R7FG V1.4 CH7 is SBUS output while V1.3 is PPM/SBUS output.

Q:Why my receiver will not connect to the remote control?
A: It means the receiver didn't bind to the transmitter, you can check if there's signal tower on the top of your transmitter screen. If not, need you bind again:
1.Put the transmitter and receiver about 50 cm apart.
2.Turn on the transmitter first, and then power on the receiver.
3.Long press the ID SET button on the side of receiver until the led light flashing, when the signal tower appears on the transmitter screen, binding is completed.

Note: If you failed to bind with the receiver, please check the steps and try again.

Q:Does RC6GS V2/RC6GS V3 have low voltage alarm function to protect my battery?
A:Yes of course, there're 4 kinds of alarm tips after you can set low voltage value, they are the transmitter , car or boat model, receiver and RSSI signal. It can remind you change the battery or make the model return in time.

Q:Why the gyro not working properly, making the servos twitch uncontrollably?
A:If the servos twitch uncontrollably after you used the gyro function, it means the sensitivity value of the gyro is too large, you can adjust the value or turn the gyro off.